pH Up - WC000423

Application

• If pH < add 100g per 10,000L

• If pH 6.8 – 7.0 add 80g per 10,000L

• If pH 7.0 – 7.2 add 60g per 10,000L

• Dissolve the product in a bucket of pool

water, and then apply the solution evenly

around the edges of the pool with the filter

running for 4-6 hours

Pro Tip:

Do not add more than 2kg at a time per 50

000L in any 6 hour period (this will avoid any

metals plating out on the pool surface if the

are present)

• This product can cause cloudiness at time of

application (see above)

• Best product for increasing both Total

Alkalinity and pH if both are low

• Allow pump and filter to run for at least 3

hours before retesting