Smart temperature sensor
Automatically regulates output in cold water which prevents excessive wear and tear on your cell, helping to reduce costs.
Hydroxinator iQ PRO
Produktinformationen
Artikelnummer WW000198PROProduktbeschreibung
Top-tier mineral chlorinator with full automation: pH + ORP regulation + smart control.
Hydroxinator® iQ PRO is the premium member of the Hydroxinator family, engineered to autonomously manage your pool’s sanitisation and water chemistry. With built-in pH and ORP (oxidation-reduction potential) sensors, it continuously adjusts chlorine and acidity. Combined with WiFi, smart temperature sensing, and pump control, it’s a comprehensive, low-effort solution.
Spezifikationen
- Model: Mid
- Cell Output : 25 g/h
- Maximum Average Pool Size: 75,000L (based on a mild weather climate, please adjust for cooler or hotter)
- Recommended Salinity: 4,000ppm
- Plumbing Capacity: 40mm / 50mm
- Operating Mode(s): Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs.
- Equipment Control: Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222)
- Cell Protection: Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear.
- Warning Indicators: "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal.
- Power Supply / Operating Power: 197W; 110-240 VAC; 50/60Hz
- Power Pack Dimensions (H x W x D): 370mm x 320mm x 100mm
- Cell Dimensions (H x W x D): 160mm × 320mm × 110mm
Produktinformationen
- Brand: zodiac-au
- SKU: WW000198PRO
Produktinformationen
Variable-speed pump control
Provides greater control over pump speed and helps reduce energy consumption. The Hydroxinator can communicate to Zodiac RS485 enabled pumps.
iAquaLink enabled
Features a built-in WiFi chip that allows you to monitor and control remotely, for complete control at your fingertips anytime, anywhere.
Automated water chemistry control
Monitors and manages your basic water parameters, keeping pH levels in balance and perfectly regulated. The Hydroxinator also features automated chlorine management via a commercial grade ORP sensor.
| Spezifikation | WW000198PRO | WW000199PRO |
|---|---|---|
Model | Mid | Large |
Cell Output | 25 g/h | 35 g/h |
Maximum Average Pool Size | 75,000L (based on a mild weather climate, please adjust for cooler or hotter) | 100,000L (based on a mild weather climate, please adjust for cooler or hotter) |
Recommended Salinity | 4,000ppm | 4,000ppm |
Plumbing Capacity | 40mm / 50mm | 40mm / 50mm |
Operating Mode(s) | Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs. | Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs. |
Equipment Control | Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222) | Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222) |
Cell Protection | Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear. | Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear. |
Warning Indicators | "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal. | "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal. |
Power Supply / Operating Power | 197W; 110-240 VAC; 50/60Hz | 197W; 110-240 VAC; 50/60Hz |
Power Pack Dimensions (H x W x D) | 370mm x 320mm x 100mm | 370mm x 320mm x 100mm |
Cell Dimensions (H x W x D) | 160mm × 320mm × 110mm | 160mm × 320mm × 110mm |
Model
WW000198PRO
Mid
WW000199PRO
Large
Cell Output
WW000198PRO
25 g/h
WW000199PRO
35 g/h
Maximum Average Pool Size
WW000198PRO
75,000L (based on a mild weather climate, please adjust for cooler or hotter)
WW000199PRO
100,000L (based on a mild weather climate, please adjust for cooler or hotter)
Recommended Salinity
WW000198PRO
4,000ppm
WW000199PRO
4,000ppm
Plumbing Capacity
WW000198PRO
40mm / 50mm
WW000199PRO
40mm / 50mm
Operating Mode(s)
WW000198PRO
Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs.
WW000199PRO
Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs.
Equipment Control
WW000198PRO
Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222)
WW000199PRO
Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222)
Cell Protection
WW000198PRO
Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear.
WW000199PRO
Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear.
Warning Indicators
WW000198PRO
"Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal.
WW000199PRO
"Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal.
Power Supply / Operating Power
WW000198PRO
197W; 110-240 VAC; 50/60Hz
WW000199PRO
197W; 110-240 VAC; 50/60Hz
Power Pack Dimensions (H x W x D)
WW000198PRO
370mm x 320mm x 100mm
WW000199PRO
370mm x 320mm x 100mm
Cell Dimensions (H x W x D)
WW000198PRO
160mm × 320mm × 110mm
WW000199PRO
160mm × 320mm × 110mm
Brochure
- Herunterladen
MagnaPool Hydroxinator iQ - Datasheet
Manual
- Herunterladen
MagnaPool Hydroxinator iQ PRO - Manual